蛋白质-多糖复合体系在活性物质传递中的应用

蛋白质-多糖复合体系作为生物活性物质传递系统的壁材,有着人工合成聚合物或无机物等其他材料不可比拟的多重优势。本文就蛋白质和多糖之间的连接方式及蛋白质-多糖复合体系形成传递系统的多种形式进行了综述,以及对此领域的发展趋势进行了展望。结合蛋白质和多糖的结构特点,二者之间的链接方式分为非共价结合的物理共聚,和共价结合的美拉德偶联、化学交联、酶催化交联等方式,文中分别对各种连接方式的原理和机理,以及其影响因素做了深入阐述。以蛋白质-多糖复合体系为壁材对活性物质的传递形式大体上分成乳化系统、胶束、纳米凝胶、分子复合物以及壳核结构等系统。不同的活性物质的特征和传递需求,可针对性地选择合适结构的蛋白质和多糖种类以及二者的连接方式和传递系统的形式。并且,随着研究的逐步发展和推进,此领域的发展趋势朝着智能化和靶向性的方向进行。目前活性物质的蛋白质-多糖复合体系的传递系统,还依然面临着系统设计、评价和应用等多方面的挑战,这就要求我们在更全面更深入了解认识其对活性物质影响和功效的基础上,安全合理地设计和深入细致地评价活性成分的传递系统。     

Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

A review of recent advances in catalytic combustion of VOCs on perovskite-type catalysts

Along with the rapid development of industry, VOCs gradually move into the spotlight, and now become a kind of harmful environmental pollutants that cannot be overlooked. This paper introduces the hazards of VOCs and the common catalytic combustion catalysts, noble metal catalysts and non-noble metal catalysts, for the elimination of VOCs. Perovskite catalysts, as one of the non-noble catalysts, play an important role in the field of catalytic combustion in recent years. According to the classification of elements doping in perovskites, the research achievements in the past five years were analyzed and reviewed. In addition, this paper also analyzes and elaborates the reaction kinetics and QSAR/QSPR models for the introduction of structural properties and reaction mechanisms.     

输电铁塔四地脚螺栓塔脚板抗拉承载力试验与计算方法研究

针对架空输电线路铁塔中常用的四地脚螺栓塔脚板进行了抗拉承载力试验和理论计算方法研究。首先,选取8个试件进行塔脚板抗拉承载力试验研究,分析塔脚底板板厚及有无加劲板对塔脚板抗拉承载力的影响;其次,通过有限元模拟塔脚板的应力分布情况,并结合“塑性分析,弹性设计”的思想,提出了一种基于屈服线理论的四地脚螺栓塔脚板抗拉承载力计算公式;最后,与试验结果、有限元仿真结果、已有技术规定中的计算结果进行了对比。结果表明:建议公式与试验结果和仿真结果较为吻合,相关技术规定中的计算结果偏于保守,验证了本文建议公式的精确性;底板厚度和加劲板的作用对塔脚板承载力影响较大。研究结果可为输电铁塔四地脚螺栓塔脚板结构设计提供参考。     

超声共振法测定圆柱体材料弹性常数的影响因素分析

为明确超声共振频谱分析法(RUS)测定圆柱体试样弹性常数的影响因素, 由此针对各向同性圆柱体开展实验, 观察圆柱体试样测量结果的分散性和稳定性, 且主要研究横纵比和有效模态数量对测量结果的影响, 并与拉伸试验的结果进行比较. 以测量结果标准差、变异系数和95%置信度下均值的区间估计3个指标来衡量结果的稳定性和分散性, 且从模态简并角度对实验结果进行分析. 最终结果表明, 当超声共振频谱分析法的有效模态数量在17左右、试样横纵比接近1时, 测量结果的稳定性和分散性较小.     

基于加权流量介数中心性的路网脆弱性分析——以无锡市为例

针对当前路网脆弱性研究中缺乏对真实交通状况考量的问题，在复杂网络理论的基础上，结合交通流量信息，提出了基于加权流量介数中心性的路网脆弱性分析方法。首先计算路网拓扑抽象图中各节点的最短路径介数中心性，然后使用流量数据对相应区域最短路径介数中心性加权，综合得到最终的脆弱性指标结果。以无锡市为例，对其实际交通路网脆弱性进行了计算，结果表明，该方法能综合反映静态全局路网结构与动态局部通行信息和现实交通情景下的路网脆弱性。     

In-chain functionalization through the combination of ring opening copolymerization and oxime “Click” reaction towards X-ray opaque polylactide copolymers

X-ray imaging functionalization of biodegradable polyesters is a great demand and challenge in biomedical applications.In this work,a strategy of in-chain functionalization through the combination of ring opening copolymerization and oxime "Click" postfunctionalization was developed towards X-ray opaque polylactide copolymers.A functionalized cyclic carbonate was first synthesized and used as comonomer of polylactide copolymers,which were subjected to postfunctionalization of oxime "Click" reaction towards iodinated polylactide copolymers.The chemical structure and physical properties of the target products were traced and confirmed.In vitro cytotoxicity evaluation with 3T3-Swiss albino by Alamar blue demonstrated a low cytotoxicity.The X-ray radiopacity was analyzed by Micro-CT and quantified by Hounsfield Units value,which could be tailorable by the feedstock.It is a promising X-ray visible implantable biomaterial in biomedical applications.